Barco UDM W30 - 8.5 Manipulating the rigging frame, center position

93R5911443 /11 UDM
Image 8–12 Example of frame rotation
5. Use the ◄ or ► button to rotate the rigging frame (image) either clockwise or counterclockwise.
6. Confirm with the OK button to return to the frame shift menu, or use the Menu back button to return to the
Position menu.
8.5 Manipulating the rigging frame, center position
What can be done?
The motorized frame can be forced back to the center position by selecting Center motorized frame.
How to reset the motorized frame?
1. In the main menu, select Installation → Position → Center motorized frame.
Image 8–13 Lens menu, Center motorized frame
A confirm action prompt will be displayed.
Image 8–14 Example of the Center motorized frame action prompt
GUI – Installation