Barco UDM W30 - 10.7 Changing the User Interface language

151R5911443 /11 UDM
As the PIN code cannot be checked with the one on the SIM card, ensure to enter the correct PIN
code.
When your SIM card is blocked, you have to remove the SIM card from the GSM module and to
insert the SIM card in a mobile phone so that you can enter the PUK code to unblock the SIM card.
How to activate
1. In the main menu, select Settings → Communication → GSM.
Image 10–32 Communication menu, GSM
At first use, the GSM pin code input menu is displayed. If a correct pin code has been entered in the past,
it will not be necessary to enter the pin code again and you can skip the next step.
2. Enter the 4 digits of the PIN code and confirm.
Image 10–33 Example of the GSM menu once the pin code has been applied
10.7 Changing the User Interface language
How to change the language of the user interface
1. In the main menu, select Settings → User interface → Language.
Image 10–34 Interface
The Language menu is displayed.
GUI – System Settings