R5911443 /11 UDM56
Image 5–6
To start up the menu structure, press the MENU button (1).
Use the arrow keys (Menu Navigation buttons) to navigate to the desired menu item (2). The background
color of the selected menu item will be highlighted light blue.
Press the Menu Selection button (center key of the arrow keys), also called OK button, to activate that item
and to jump one level deeper (3).
Use the numeral keys to enter values, or use the arrow keys to move the bar scale up or down.
Press the Back button to go up one level (4).
Image 5–7 Example of the home menu
When a blue slider bar on the right side of the window is visible, this means that there are more
items to show than those currently displayed.
Define values
Menu settings are displayed using checkboxes, bar scale sliders, and drop-down lists.
To set a value:
• Press OK to select or deselect a checkbox (turn a function ON or OFF).
• Use the arrow keys to move the bar scale slider up or down on the value line. For a bar scale 0-9, each
step will equal 10% of the total value.
• To enter the value as a direct number, press OK, input the digit(s), and then press OK again to execute and
exit cursor mode e.g. OK 79 OK.
Within an input field, use the * button as backspace button to remove an entered digit. Use the # button to
enter a dot (.).
Changes to values are implemented dynamically.
GUI – Introduction
To Next Page
Loading...
