63R5911443 /11 UDM
Image 6–6 Main menu, Source
2. Press OK.
The Select Source menu is displayed with the actual available sources filled out.
3. Scroll down to the bottom of the list of available sources and select Connector settings.
Image 6–7 Source menu, connector settings
The available input connectors are displayed.
Image 6–8 Example of the Connector settings menu
4. Select the desired connector.
The connector settings menu for the selected connector will be displayed.
Image 6–9 Example of connector settings for one of the connectors
GUI – Source
To Next Page
Loading...
