75R5911443 /11 UDM
Image 7–16 Example of a (maximum) negative horizontal correction being applied on the projected image.
Image 7–17 Example of a (maximum) negative vertical correction being applied to the projected image.
Image 7–18 Example of a maximum negative correction on both horizontal and vertical axes to the projected image.
Required tools
Light meter
How to adjust brightness across the screen
While the projector is ON mode:
1. In the main menu, select Image → Tilted brightness uniformity.
Image 7–19 Image menu, Tilted brightness uniformity
The Tilted brightness uniformity menu is displayed.
GUI – Image
To Next Page
Loading...
