Manual 2100-680
Page 15 of 18
OPTIONAL NETWORK SET-UP
+
-
ref
+
-
ref
+
-
ref
BACnet
thermostat
1
BACnet
thermostat
2
BACnet
thermostat
3
Notes:
- Wiring should be daisy chained
- Respect polarity
- If using 2 conductor shielded wires, connect the
shield of each feed together on the back of the
controller. ONLY ground the shield at one location.
DO NOT connect the shield to the ref terminal.
BACnet
®
Communication Wiring
No communication wires required
Wireless Communication
To Next Page
