Bard LC6000-200 - User Manual

Page 1 of 37
Bard Manufacturing Company, Inc.
Bryan, Ohio 43506
www.bardhvac.com
Manual : 2100-669F
Supersedes: 2100-669E
Date: 3-18-19
SERVICE AND INSTALLATION
INSTRUCTIONS
WITH REPLACEMENT PARTS LIST
LC6000-200 CONTROLLER
Part of the Bard Cooling System
NOTE: LC6000-200 controller is required for operation when
multiple MULTI-TEC
®
, FUSION-TEC
®
WR Series and/or
MEGA-TEC
TM
wall-mount units are used.
Additional information regarding the installation and setup
of the LC6000-200 controller and software is included in
the system installation instructions located inside the wall-
mount unit control panel.

Summary

LC6000 CONTROLLER INSTALLATION

Mounting the LC6000 Controller

Supply Wiring and Grounding

Instructions for connecting power supply, including proper grounding of the controller box.

Indoor Sensor Installation

Emergency, Ventilation, and Generator Connections

Wiring for emergency off, emergency ventilation, and generator run input contacts.

Communication Wiring Termination

ALARMS

Alarm Adjustment and Acknowledgment

How to adjust alarm setpoints and acknowledge/clear active alarms via the controller interface.

Temperature Alarms

Configuration for low temperature, high temperature, and high temperature 2 alarms.

Special Condition Alarms

Setup for Emergency Off, Generator, and Emergency Vent alarms.

Zone Unit Alarms

Humidity Alarm Configuration

Setting humidity thresholds and configuring remote notification for humidity events.

CONTROL OPERATION

Temperature Control Settings

Humidity Control Settings

TROUBLESHOOTING

Sensor Troubleshooting

Steps to diagnose and resolve issues with the 8403-079 indoor and 8301-090 outdoor sensors.

Outdoor Sensor Troubleshooting

Steps to diagnose and resolve issues with the 8301-090 outdoor temperature/humidity sensor.

LC6000 REPLACEMENT PARTS LIST

Replacement Parts Identification

Bard LC6000-200 Specifications

General

Brand	Bard
Model	LC6000-200
Category	Controller
Language	English