LC6000 REPLACEMENT PARTS LIST
Replacement part will have a letter attached to the end of the part number to designate software version (Example: 8301-076-
001A). A software upgrade of all PLCs onsite (units and controllers) should accompany any PLC replacement. Latest revisions of
software, change log and instructions are available on the Bard website at http://www.bardhvac.com/software-download/
uPC3 PLC board digital output ratings. Type: A (SPST) with a rating of AC 230V 3(1)A 100k cycles, 250 Vac FLA 1A, LRA
6A Definite Purpose 30k cycles, 250 Vac, 3A resistive, 50k cycles, C300 pilot duty, 30k cycles. (EN60730-1, UL60730)
Batteries for the control boards are field supplied. Supplier part number is BR2032.
Optional NS – Not Shown
Manual 2100-669F
Page 37 of 37
Dwg. No. Part No. Description
1 8407-074 Transformer X
2
8301-076-001 UPC3-LC6000 1.1.0
X
3 8301-053 pGDEvolution Panel Display X
4 8607-052 Grounded Terminal Block 2
5 8614-059 1.0 Amp Fuse 4
6 8607-039 Fused Terminal Block 4
7 8607-057 Terminal Block Double Level 54
8 8611-144 End Clamp (for Din Rail) 6
9 8301-075 USB Micro Cable Female to Male X
NS 8301-055 EMI Ferrite Filter 2
NS 8403-079 Remote Temperature/Humidity Sensor X
NS 8301-058
Remote Temperature Sensor
X
NS 8301-090
Outdoor Temperature/Humidity Sensor
X
NS 8301-059 TEC-EYE (Service Tool), 5' Telephone Cable X
3
2
1
4
56
8
9
7
To Previous Page
Loading...
