Need help?Do you have a question about the Bard I36Z1-A and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Phase | 1 |
| Refrigerant | R-410A |
| Model Number | I36Z1-A |
| Cooling Capacity | 36000 BTU/h |
| Voltage | 208/230V |
| Heating Capacity | 36000 BTU/h |
Procedures for inspecting shipping damage and safely removing the unit from its skid.
Guidance on moving the unit, including partial disassembly for tight spaces.
Methods for attaching the unit to the structure and seismic securement advice.
Diagram illustrating wall bracket and sleeve mounting for wall installation.
Instructions for securing the unit to wood-framed walls.
Details on drain connections, routing options, and trap requirements based on local codes.
Detailed instructions for attaching the unit to the pre-installed wall sleeve.
Guidance on sizing field wiring and circuit breakers for main power.
Specifies the required refrigerant and oil type, along with handling precautions.
Essential steps before start-up, including critical safety warnings for refrigerant handling.
Step-by-step guide for diagnosing issues with the solid-state heat pump control board.
To Next Page
