56-101-00212 Revision E Page | 2
B. The Owner's Warranty Registration card (refer to Figure 2), is to be completed by the
owner and returned to Barfield, Inc. within ten (10) days of purchase to ensure
automatic update of printed matter and validation of warranty.
To register your unit, please visit https://www.barfieldinc.com/warranty_registration or
scan the QR code on the supplied Warranty Registration.
Figure 2 Owner Warranty Registration Card
C. Each new or re-certified unit is delivered with a Certificate (not pictured) that shows the
date when the unit was tested by the manufacturer, its serial number, and when the next
certification is due. This certificate confirms that the unit performed according to its
design specifications.
D. For 2311FA Limited One Year Warranty refer to Figure 3.
3. RECERTIFICATION
A. The Test Set has a one-year recertification requirement. Maintenance required by the
Test Set and the Pressure Gauge must be performed by qualified technicians in a shop
equipped with the necessary tooling and resources. Contact Barfield for Maintenance
and Calibration requirements.
To Next Page
Loading...
