Barnstead 30400 - General Specifications; Environmental Conditions

Models F30420C, (-33), F30428C, (-60-80)
(-33-60-80), (-33-80), & (-80)
(-60-80) & (-80) F30438CM & (-60)
F30430CM, (-33),
(-33-60) & (-60)
Overall Dimensions
Width 21 1/2 (55) 21 1/2 (55)
IN. (CM) Height 29 1/2 (75) 29 1/2 (75)
Depth 25 1/2 (65) 25 1/2 (65)
Chamber Dimensions Width 14 (35) 14 (35)
IN. (CM Height 14 (35) 14 (35)
Depth 14 5/8 (37) 14 5/8 (37)
Weight Lbs. (KG) 188 (86) 188 (86)
Electrical Ratings Volts 240 208
Amps 22.9 26.4
Watts 5500 5500
Freq. 50/60 50/60
Phase 1 1
Temperature Ratings Cont. 400°F-1800°F* 400°F-1800°F*
°F (°C) (204°C)-(982°C) (204°C)-(982°C)
Intermittent 1800°F-2000°F 1800°F-2000°F
(982°C)-(1093°C) (982°C)-(1093°C)
* The maximum continuous temperature for ashing furnaces (-60 models) is 1787°F (975°C).
Environmental Conditions
Operating: 17°C - 27°C; 20% to 80% relative humidity, non-condensing. Installation Category II
(over-voltage) in accordance with IEC 664. Pollution Degree 2 in accordance with IEC 664.
Altitude limit: 2,000 meters.
Storage: -25°C to 65°C; ; 10% to 85% relative humidity.
6
General Specifications