1324D-1624D Owner’s Manual 8/29/18 Page 12 of 19
SPEED
CONTROL
TENSION ADJUSTMENT
To adjust the Speed Control handle tension, follow these simple instructions.
1. Take off the back cover.
2. Look under the speed control and you will see a socket head bolt threaded into the speed cable
clamp (See diagram). This is the tension clamp.
3. The socket head bolt is adjusted with a 3/16” hex wrench.
4. If you tighten the socket head bolt (turn clockwise), the tension of the speed lever will
increase.
5. If you loosen the socket head bolt (counter-clockwise), the tension will decrease.
ADJUST HERE
To Next Page
Loading...
