1324D-1624D Owner’s Manual 8/29/18 Page 8 of 19
WHEEL DRIVE VALVE CABLE ADJUSTMENT
MEASURE MOVEMENT
The clutch cable and lever must have some free play. The cable will stretch and occasionally needs
adjustment. Two hoses are hidden in the illustration.
1. Rotate the actuator arm clockwise, by hand, to take up any free play. Measure the distance from the
pin of the actuator arm to the end of the cable housing.
2. Pull the clutch lever all the way up until it touches the handle bar grip. With the lever pulled up, again
measure the distance from the pin of the lever to the cable housing. Calculate the difference.
3. Adjust the cable for 7/16” to 1/2" movement of the actuator arm at the pin. Do not include any lever
free play in the measurements.
4. To see a video on how to do this adjustment, enter the following address in your browser URL
window: https://www.youtube.com/watch?v=utUdozpYBcg&feature=youtu.be
To Next Page
Loading...
