BaseStation 3200 Advanced Irrigation Controller Manual
Page 15
Connecting Power and Ground
All C-series wall mount 3200 controllers ship with a conduit-ready ½ inch male exposed thread connection point as
shown in the diagram.
Make all AC power connections in an approved electrical connection junction box, in
accordance with all local electrical codes.
Wire nuts for AC power connections are provided.
X/XS-series Wall Mount Cabinets
The X and XS series wall mount cabinets are designed for outdoor or indoor wall or post mounting. The cabinet
features a center located key-hole main mounting screw assembly for easy mounting, plus an additional center
mounted hole as indicated in the diagram below. The X and XS cabinets feature a ¼ inch air gap between the
chassis and the mounting surface – this reduces long term risk of water incursion or ice-dam buildup during
inclement weather.
For security purposes, all mounting screw heads are protected behind the locked front cover, making theft or
vandalism materially more difficult.
If you mount the cabinet on a post or pole, use an appropriate wood or metal back-plate behind the cabinet to
ensure best long term reliability and secure connections.
To Next Page
Loading...
Need help?
General