Installation
Basler ace GigE 25
2 Installation
The information you will need to do a quick, simple installation of the camera is included in the Ace
Quick Installation Guide for GigE Cameras (AW000897xx000). You can download the Quick
Installation Guide from the Downloads section of our website:
www.baslerweb.com
More extensive information about how to perform complicated installations is included in the
Installation and Setup Guide for Cameras Used with Basler’s pylon API (AW000611xx000).
You can download the Installation and Setup Guide for Cameras Used with Basler’s pylon API from
the Downloads section of our website:
www.baslerweb.com
The install and setup guide includes extensive information about how to install both hardware and
software and how to begin capturing images. It also describes the recommended network adapters,
describes the recommended architecture for the network to which your camera is attached, and
deals with the IP configuration of your camera and network adapter.
After completing your camera installation, refer to the "Basler Network Drivers and Parameters" and
"Network Related Camera Parameters and Managing Bandwidth" sections of this camera User’s
Manual for information about improving your camera’s performance in a network and about using
multiple cameras.
To Next Page
Loading...
