Basler ace acA640-90gm - Camera Connector Pin Assignments and Numbering; 6-Pin Receptacle Pin Assignments & Numbering

Physical Interface
36 Basler ace GigE
5.2 Camera Connector Pin Assignments
and Numbering
5.2.1 6-pin Receptacle Pin Assignments & Numbering
The 6-pin receptacle is used to access the physical input line and physical output line on the
camera. It is also used to supply power to the camera (if PoE is not used).
The pin assignments for the receptacle are shown in Table 4.
The pin numbering for the 6-pin receptacle is as shown in Figure 21.
Pin Designation
1 +12 VDC Camera Power
2 I/O Input 1
3 Not Connected
4 I/O Out 1
5 I/O Ground
6 DC Camera Power Ground
Table 4: Pin Assignments for the 6-pin Receptacle
4
5
6
2
3
1
Fig. 21: Pin Numbering for the 6-pin Receptacle