Basler BIP-640c User Manual

Configuring the Camera
Basler IP Camera 45
To Add a New User
1. Click the New User button on the Manage Users tab. A User Editor window will appear as
shown below.
2. Enter a user name, select a user level (see Section Table 1: on page 44), enter a password,
enter the password verification, and click the Save button.
3. A Success message window will open. Click the OK button.
To Delete an Existing User
1. In the Manage Users tab, click on the name of the user you wish to delete. As shown below, the
user information will become highlighted, and the Delete User button will become ungrayed.
2. Click the Delete User button.
3. An Are you sure message window will open. Click the Ye s button.
4. A Success message window will open. Click the OK button.
You must have at least one administrator level user. If there is only one
administrator level user, you will not be able to delete that user.

Basler BIP-640c Specifications

General

Brand	Basler
Model	BIP-640c
Category	IP Camera
Language	English