Configuring the Camera
Basler IP Camera 47
To Change an Existing User’s User Level
1. In the Manage Users tab, click on the name of the user whose user level you wish to change
(see Section Table 1: on page 44 for user level descriptions). As shown below, the user
information will become highlighted, and the Change User-Level button will become ungrayed.
2. Click the Change User-Level button. A User Editor window will appear as shown below.
3. Select a new user level from the drop down menu, and click the Save button.
You must have at least one administrator level user. If there is only one
administrator level user, you will not be able to change that user’s user level.
To Next Page
Loading...
Need help?
General
