Technical Specifications
68 Basler IP Camera
Alarm Management Ring buffer for pre and post alarm
Events triggered by motion detection or external input
Image upload via FTP or Email
Protocols TCP/IP, HTTP, UDP, ICMP, ARP, DHCP, NTP,
RTP, RTSP, RTCP, SMTP, IGMP, UpnP
Processor / Memory 600 MHz dual core multimedia DSP, FPGA
128 MB RAM, 8 MB Flash
Battery backed-up real time clock
Minimum PC
Requirements
Pentium 4, 2.4 GHz or higher, 256 MB RAM or more
AGP Graphics card, 64 MB RAM or more
1280 x 1024 display or better
100 Mbps NIC
Win 2k, XP, Vista, or Server 2003 OS
Internet Explorer 6.0 or higher
Power PoE (Power over Ethernet IEEE 802.3af) or + 7 to + 20 VDC
Power consumption is 5 W max at 12 VDC
Connectors Screwable RJ-45 connector for 10/100 Base-T Ethernet, full or half duplex
6-pin Phoenix terminal for DC power, digital I/O, and RS-232
IR-Cut Filter Fixed filter Automatically
removable filter
Fixed filter Automatically
removable filter
Operating Conditions 0° to 50° C (32° to 122° F)
20% to 80% relative humidity (non condensing)
Standards FCC Class A/B, CE, RoHS
Housing 89.9 mm x 29 mm x 44 mm, full metal casing
Weight ~ 230 g
Specification BIP-640c BIP-640c-dn BIP-1000c BIP-1000c-dn
Table 4: BIP640c and BIP-1000c Technical Specifications
To Next Page
Loading...
Need help?
General
