Basler DGC-2020ES - Page 115

9469200995 13-15
DGC-2020ES BESTlogic™Plus
Name
Description
Symbol
Engine kW Over
Load 1
True when the Engine kW Overload 1 Pre-Alarm
settings have been exceeded.
Engine kW Over
Load 2
True when the Engine kW Overload 2 Pre-Alarm
settings have been exceeded.
Engine kW Over
Load 3
True when the Engine kW Overload 3 Pre-Alarm
settings have been exceeded.
Escape Mode
This pre-alarm indicates a temporary override of
inducement not to operate the engine. This is set by
the ECU and is not a user setting.
Exhaust System
Error
Pre-alarm indicating an Exhaust System Error has
been detected. A number of conditions cause this;
examples include DEF Tank Low indication, Purge
in Progress, Exhaust System Error, Exhaust System
Inducement Indications, etc. This is derived based
on ECU Lamp conditions communicated from the
Engine ECU to the DGC-2020ES via J1939 CAN
Bus communications.
Fuel Leak
True when the Fuel Leak Detect function is
configured as a pre-alarm and the activation delay
has expired.
Fuel Level
Sender Fail
True when the Fuel Level Sender Fail is configured
as a pre-alarm and the activation delay has expired.
Generator
Breaker Close
Fail
True when a generator breaker close fail pre-alarm
occurs. The pre-alarm occurs when the DGC-
2020ES has issued a generator breaker close
output but does not receive a generator breaker
status input that indicates the breaker has closed
before the breaker close wait time has expired.
Generator
Breaker Open
Fail
True when a generator breaker open fail pre-alarm
occurs. The pre-alarm occurs when the DGC-
2020ES has issued a generator breaker open output
but does not receive a generator breaker status
input that indicates the breaker has opened before
the breaker close wait time has expired.
Fuel Filter 1
Leak
This logic status input indicates that the engine ECU
has detected a leak in fuel filter 1, and has
communicated this to the DGC-2020ES over CAN
Bus.
Fuel Filter 2
Leak
This logic status input indicates that the engine ECU
has detected a leak in fuel filter 2, and has
communicated this to the DGC-2020ES over CAN
Bus.
Generator
Protection
27
True when the 27 element is configured as a pre-
alarm and has tripped.
Generator
Protection
59
True when the 59 element is configured as a pre-
alarm and has tripped.
Generator
Protection
47
True when the 47 element is configured as a pre-
alarm and has tripped.