Batavus VA - Various; Rearfork components

Various
Also attached to the rearfork is the automatic chain
tensioner (see pict. 28, item B) and the crankaxle-
bearings (see pict. 28, item D).
See to it, that the chain-tensioner is properly aligned
with the pedal chain.
The crankaxle bearings should be fitted by using a
percussion stamp (drift), thus achieving centring of the
bearing at the same time.
In case the axle nuts have been removed or loosened the
alignment of the wheels should be checked by means of
a rule, after retightening the nuts (see pict. 31).
'
»
\
A
V
Pict. 31
10.76