Bauer 2229E-B User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference. 22f
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2022 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Bauer 2229E-B Specifications

General

Brand	Bauer
Model	2229E-B
Category	Power Tool
Language	English

Summary

Important Safety Information

General Tool Safety Warnings

Provides essential safety rules for operating power tools to prevent injury or death.

WARNING SYMBOLS AND DEFINITIONS

Explains safety alert symbols and their meanings for hazard identification.

Grounding Instructions

Details proper grounding procedures to prevent electric shock.

Drill Press Safety Warnings

Specific safety precautions for operating the drill press.

Specifications

Setup - Before Use

Mounting

Details how to securely attach the drill press to a workbench.

Assembly

Step-by-step guide for assembling the drill press components.

Operating Instructions

Tool Set Up

Instructions for initial setup and adjustments before operation.

Table Adjustment

Procedures for adjusting the drill press table's height, tilt, and pivot.

Setting a Drilling Depth

How to set the desired drilling depth using the depth gauge.

Changing Drill Speed

Guides on adjusting the drill press speed based on material and bit size.

Drill Bit Installation

Instructions for correctly inserting and securing drill bits into the chuck.

Workpiece and Work Area Set Up

Prepares the work area and secures the workpiece for safe drilling.

General Operating Instructions

Covers the fundamental steps and safety procedures for using the drill press.

Maintenance and Servicing

Cleaning, Maintenance, and Lubrication

Procedures for cleaning the tool, performing routine maintenance, and lubrication.

Belt Inspection and Tensioning

How to inspect the belt for damage and adjust its tension.

Troubleshooting

Parts List and Diagram

Limited 90 Day Warranty