Update Guide 08. Juni 2016 Seite 11 von 12
Figure 21 - list of files
Select the language file and press “import”. The import can take several seconds because the
Ecostar6000 makes an software reset.
Step5: Select the language
After the newest language version is installed it only has to change to this newest version. This can
be done at the language menu by pressing the button next to “select language” -> the list of
imported languages is shown
Figure 22 - select language
Select the needed language and press “modify”. After a change it is important to make an power
reset by disconnecting the power supply.
To Next Page
Loading...
