Bauer G 120 II V - Approved Lubricants Chart

G 120 II V
Page 124 1st Edition, Rev. 0 Chg. 2
8.5.4 Approved Lubricants Chart
Unless otherwise specified in text, use the lubricants in Table 2.
8.5.5 Glossary of Abbreviations and Acronyms
AC Activated Charcoal, removes odor and taste
ACD Automatic Condensate Drain
ASME American Society of Mechanical Engineers
CW Clock Wise
CCW Counter-Clockwise
CGA Compressed Gas Association
DIN Deutsches Institut für Normung
DOT Department of Transportation
E1 single phase electrical supply (Electric 1)
E3 three phase electrical supply (Electric 3)
HP Hopcalite, a chemical catalyst which converts carbon monoxide to carbon dioxide
IAW In Accordance With
MS Molecular Sieve, removes moisture
NEC National Electrical Code
NEMA National Electrical Manufacturers Association
NFPA National Fire Protection Association
OSHA Occupational Safety & Health Administration
ODP Open Drip-proof (motor)
OEM Original Equipment Manufacturer
PLC Programmable Logic Controller
PMV Pressure Maintaining Valve
SC Securus
®
moisture sensing device
Table 8-2: Lubricant Chart
Usage Lubricants
O-rings, rubber and plastic parts; filter housing
threads, sealing rings
Parker Super “O” Lube
Bolts, nuts, studs, valve parts, Copper gaskets and
tube connection parts (threads, cap nut and com-
pression rings)
Never-Seez
®
NSWT, Pipe Dope or teflon tape
Paper gaskets
DOW Corning 732 or equivalent silicone com-
pound applied on both sides before assembly,
High temperature connections
DOW Corning 732 or equivalent temperature resis-
tant compound,
Tube connection ferrules, Never-Seez
®
NSWT