Operation manual for BAUER RAINSTAR Series T32, T42 47
How to get started:
Disconnect electronic from battery.
Out the SIM-card unit an ordinary mobile phone and change the pin code to 1111.
Try to send and receive an SMS in order to test SIM-card and to check if everything is working properly.
Insert the SIM-card into the modem.
Operate the eject mechanism (yellow button next to
the card holder) to open the card holder by pressing
it down with a pen, for example.
Insert SIM-card in the in den SIM-cardholder
and push it back into the housing.
Connect communication-, power and antenna cable.
Connect the power and set machine data No.30
0 = GSM disabled
1 = GSM enabled, all telephone numbers are allowed, no Speed change possible.
2 = GSM enabled, only telephone numbers on sms list allowed -Speed change possible.
SPEED 11.1m/h
DOSE 22 mm
TIME 14:10 STOP 7:43
M.DATA 30 1
To change machine data see operating manual.
If selected numbers are used they show on the display of the PR10-12, when receiving SMS from a phone. The
number should always be entered in the same format e.g. +44213 ... 0044213 ... 213...
SPEED 11.1m/h
DOSE 22 mm
TIME 14:10 STOP 7:43
A: +45123456
To change machine data see operating manual.
To Next Page
Loading...
