o IMPORTANT: Defective bulbs should be replaced
immediately.
o If the lights still do not work,
make sure that the bulbs are
fitted properly into their
housings before you call for
technical assistance.
o Refit the grease filters.
Fitting the S1 carbon filters
If the appliance is going to be used in recirculation mode then it is
necessary to fit a carbon filter. This will help to absorb unpleasant
odours caused by cooking.
20
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED THE
RANGE HOOD FROM YOUR MAINS SUPPLY.
1) Remove the grease filters.
2) Hook the carbon filter over
the pins that are located at
the end of the motor.
To Next Page
Loading...
