guarantees etc. These should be removed and kept for future
use.
o If possible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access to the ceiling. If this
is not possible, then a thick, protective covering should be
placed over the worktop, hob top or cooker. This will help to
protect these surfaces from damage and debris.
o Select a flat surface for assembling the range hood. Cover that
surface with a protective covering and place all range hood parts
and fittings on it.
o Rawl plugs are provided to secure the hood to most types of
walls and ceilings. However a qualified technician must verify the
suitability of the materials, in accordance with the type of wall
and ceiling. The wall and ceiling must be strong enough to take
the weight of the hood.
o Do not tile, grout or silicone this appliance to the ceiling. This
appliance is designed to be surface mounted only.
o Remove any protective wrapping that has been put on the range
hood or chimney sections, to protect them during transit.
Installing your range hood
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR RANGE HOOD WHETHER TO USE
IT IN EXTRACTION MODE OR RECIRCULATION
MODE. PLEASE TURN TO PAGE 22 NOW TO
UNDERSTAND THE DIFFERENCES BETWEEN THESE
TWO MODES.
o We recommend that two people install this hood.
IMPORTANT: YOUR RANGE HOOD SHOULD BE CONNECTED TO
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
BKH61SS, BKH91SS, BKH600GLS, BKH900GLS
1) Remove the grease filters.
23
To Next Page
Loading...
