21
g either a sponge or soft cloth. No abrasive cleaners
should be used.
tainless steel surfaces of this
appliance.
or use on your appliance.
o Any damage that is caused to the appliance by a cleaning
e fixed by the manufacturer free of
charge, even if the appliance is within the guarantee
period.
g
ed from
your mains supply before you attempt to either
o Remove the light cover by turning it anti-
o Unscrew the bulb clockwise and remove it from its
W/300°C, screw type
pygmy.
o Do not use any other type of bulb.
o Place the lamp cover back into position.
o Outer parts of the oven should only be cleaned with warm soapy
water, usin
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the s
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable f
product will not b
Replacin
the oven bulb
IMPORTANT: The oven must be disconnect
remove or replace the oven bulb.
o Remove the oven shelf and the drip tray.
clockwise.
holder.
o Replace the bulb with a 25
To Next Page
Loading...
