Baumuller b maxx BM4400 - Connection Diagram with Motor Brake Controlled Via an Additional Relay

Installation
Compact manual b maXX
®
BM4400, BM4600, BM4700
Document no.: 5.06014.02
21
of 94
5
Additional relay is necessary only if the voltage of the brake is ≠24V, if the current of the
brake is greater than the switching capacity of X101 or if you consider UL508C and the
current of the brake is greater 4 A.
Perhaps consider a limited operating voltage range of the brake because of the internal
voltage drop to max. 2.6 V.
Figure 7: Connection diagram with motor brake controlled via an additional relay.