TAM 00695 4
DST2-135 – 400 W 10 / 2019
Three-phase synchronous motor, water-cooled English
1 General Safety Instructions
1.1 Safety
This electric motor has been constructed in accordance with the relevant safety standards and
underwent an operational safety check before leaving our factory.
To ensure correct commissioning and safe utilisation, please read the following:
• these Commissioning and Maintenance Instructions and if applicable the enclosed
supplementary parts
• the enclosed safety and commissioning notes
• the technical documentation that accompanies the product
• the commissioning and safety notes provided by the manufacturer of the converter
• the national, local and system-specific regulations concerning your finished product.
• The technical instruction of TAM 00697 for use in safety-oriented applications
We draw your attention to the following hazards when using the product:
Hazards resulting from • lifting and transport processes
• electrical current
• moving parts
• hot surfaces
• EMC disturbances
• mechanical overloads
• thermal overload
To avoid damages to persons and property and minimize residual risks, please read all of the
safety instructions and, in particular, those that are marked with a symbol.
Danger to life from electrical current
Non-observance can cause the death or severe injuries.
Warning about general dangers
Non-observance can cause severe injuries or material damage.
Warning about dangerous situation
Non-observance can damage the system and also the vicinity.
Do not touch!
Non-observance can cause severe injuries.
No Inadmissible actions!
Non-observance can cause severe injuries
Warning about hof surfaces
Non-observance can cause severe injuries
Magetic field warning.
Failure to observe can lead to severe injuries or damage to property.
Electrostatically sensitive components
Non-observance can damage the system or the vicinity
To Next Page
Loading...
Need help?
General
