EasyManua.ls Logo

Baumuller DST2 Series - Items Supplied; Nameplate

Baumuller DST2 Series
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TAM 00695 7
DST2-135 400 W 10 / 2019
Three-phase synchronous motor, water-cooled English
2.2 Items supplied
The delivery is put together on an order-related basis.
The carrier must immediately be notified of any damage caused during transport.
On delivery, please check that the ratings and motor type correspond with the order data. In
the event of apparent defects or incomplete delivery, the appropriate Baumüller office or the
Baumüller head office in Nuremberg should be notified immediately.
In both of the above cases, commisioning must not take place until the error has been rectified by a
specialist.
2.3 Nameplate
The nameplate is used to identify each electric motor. The unique motor number is clearly shown
on each nameplate and is essential for internal tracking procedures. The nameplate must be
legible at all times. Never remove the nameplate from your motor.
Figure 1: Nameplate
1 →
Motor type / designation
2 →
Rated current
3 →
Rated frequency
4 →
Power factor
5 →
2D Code
6 →
Motor number
7
Motor operating mode
8 →
Thermal class
9 →
Motor protection class
10
Balance quality
11
Article number
12
Rated voltage
13
Rated speed
14
Rated power
15
Standards and approvals

Related product manuals