1.1 Using this manual
This update and maintenance manual contains all information needed for updating the
device software of the CU control unit and the AGP acoustic ground probe and for the
maintenance, cleaning and care of the protrac® pin-pointing system.
The update and maintenance manual should be considered part of the product and
stored in an easily accessible location.
If this update and maintenance manual is lost, please contact BAUR GmbH or your
nearest BAUR representative (http://www.baur.eu/baur-worldwide).
1.2 Applicable documents
This update and maintenance manual applies in conjunction with the user manual for the
protrac® pin-pointing system and other applicable documents.
1.3 Information on the screenshots used
The screenshots used are intended to illustrate the procedure and may differ slightly from
the actual state.
To Next Page
Loading...
