Baur Protrac - 3 Maintenance and Care; Charging the Batteries; Replacing the Batteries

protrac® Maintenance and care
823-025-3 11 / 14
3.1 Charging the batteries
CAUTION
Danger of explosion or fire due to charging non-rechargeable
batteries
Risk of injury, damage to device.
 Never charge non-rechargeable batteries.
1. Switch off the device.
2. Ensure that rechargeable batteries are inserted in the device.
3. Connect a suitable charger to the charger socket.
3.2 Replacing the batteries
Required equipment
 8 x each for CU or 6 x for AGP:
 NiMH Mignon 1.2 V IEC LR6 or
 Alkaline batteries 1.5 V IEC LR6
 protrac® screwdriver (included in standard delivery)
Procedure
1. Switch off the device.
2. Open the battery compartment and replace the batteries.
NOTICE! Wrong polarity of rechargeable or non-rechargeable batteries can destroy the
electronics.
3. While inserting batteries, pay attention to the polarity of the rechargeable or non-
rechargeable batteries.
4. Close the battery compartment.
3 MAINTENANCE AND CARE