Bavaria VIRTESS 420 - Maintenance Intervals

BAVARIA Owner’s manual
6
2.1. Maintenance intervals
Weimposethehigheststandardsonthequalityandsafetyofourproducts.Forroutineservicechecksthefollowing
components and equipment must be inspected and replaced if necessary. Also please be sure to comply with the
requirementsforserviceintervalsfortheengines,generatorsandassociatedequipment.Failuretocomplywiththese
regular inspection and replacement intervals for these safety-related components can lead to an elevated risk of
injuryanddeath.
Regular inspection and maintenance is an essential activity to ensure the boat‘s longevity and the crew‘s safety.
Thissectionincludesagenerictablewhichdetailstypicalinspectionandmaintenanceintervals.Thisisnotspecic
to your craft and some sections will not apply. The necessary frequency of service or maintenance depends upon the
environment in which the boat operates. The intervals listed in this section should be viewed as maximums. We im-
pose the highest standards on the quality and safety of our products as well as the related maintenance.
In the course of routine service on yachts produced by us, we once again point out that the following components and
equipment must be inspected and replaced if necessary. Also please be sure to comply with the service intervals for
engines, generators and associated equipment.
2.1.1. Maintenance and replacements intervals
System Necessary maintenance measures Interval frequency
prior to every use Read OEM manual Replace every „X“ years every 25 hrs or everry 6 month annually
Batteries Checkpolesforcorrosionandtightt
Seacocks and
hull penetra-
tions/ttings
control of tightness and function
5
control corrosion
5
Navigation lights Control function
Bilge areas Clean&limberholesfree
Bilge pump control switch and function
Zinc anodes Check and replace if necessary
wherever possible
Hull Check for loose, damaged or missing parts
Drive system check for faultless and smooth operation
Security and
safety equipment
Check for damage and completeness, services
intervals, check service seals
Electrics Check for loose connections and terminals
Engine CheckwaterseperatorandV-Belt,lubrication,
engine, gears and drive with prop
Tubing and their
connections
Check tightness and condition 5