Baxi Neta-tec Combi GA Range - Information Menu

To Next Page

To Previous Page

Information Menu

By gaining access to the Information Menu a number of values can be viewed. The information can be used to diagnose

faults, e.g. the value of a sensor to check if it is open circuit or closed circuit

Press ‘ip’ for 1 second.

The display will alternate between the ‘0’i code (e.g. i 02) and its value.

To scroll down the list press the ‘ip’ button.

i 00: Error Subcode See table on page 18

i 01: C.H. Temperature °C

i 02: External Temperature (if present) °C

i 03: D.H.W. Temperature °C i 03 & i 04 are the same sensor

i 04: D.H.W. Temperature °C

i 05: Water Pressure bar

i 06: Return Temperature °C

i 07: Flue Temperature °C

i 08: Heat Exchanger Temperature °C

i 09: Not used

i 10: Not used

i 11: Not used

i 12: Not used

i 13: Not used

i 14: Not used

i 15: Not used

i 16 : Not used

i 17: Fan Speed RPM RPM

i 18: num ic

This function operates for 3 minutes, or can be cancelled by pressing the reset ‘R’ button.

10.0 Information Menu

Other manuals for Baxi Neta-tec Combi GA Range