Baxtran BR16 - Piece Counting Mode Operation; Scale Parameters Configuration; Internal Counting (A;D) | UF-1; Weight Limits Configuration | UF-2

ENUSER’S MANUAL BR16
54
7. PIECE COUNTING MODE
1. Pressthekey untilthesymbolPCS appears on the screen
2. Pressthekey successivelytochoosethequantityofpiecesofthesample.Onthescreenwillappear,successively,C10/C20/
C50/C100/C200.
3. Placethesampleontheplatform,andwaituntilthesignofstabilityandpressthekey .
4. Placetheproductontheplatformandthescreenwillshowthenumberofpieces.
TheaccumulationandthesendingofdatawilldependonthemodechoseninthesectionUF-6.
• Toturntothenormalweighingmode,pressthekey
• Iftheuserwantstogobacktothepiececountingmode,usingthesamesampleofreference,pressthekey again.
• Iftheuserwanttochangethesampleofreference,theusermustrepeatthestepsdescribedabove.
8. PARAMETERS CONFIGURATION
8.1 INTERNAL COUNTING (A/D)
UF-1
8.2 CONFIGURATION OF THE WEIGHT LIMITS (SUPERIOR AND INFERIOR)
UF-2
8.3 AUTO SWITCH OFF
UF-3
8.4 CONFIGURATION OF THE ILLUMINATION OF THE DISPLAY
UF-4
8.5 HOLD FUNCTION
UF-5
8.6 RS-232 DATA EXIT
UF-6
8.7 CONFIGURATION OF THE SPEED OF THE AD CONVERTER
UF-7
8.8 BLIND
UF-8
8.9 CONFIGURATION OF THE GRAVITY
UF-9
Toaccesstheconfigurationofparameterswhenthescreenisinzero,theusermustpressatthesametimethekeys and .
Pressthekey or tochoosethedesiredcharacter(UF-1~UF-11).
Togobacktothepreviousmodepressthekey .
8.1 INTERNAL COUNTING (A/D) | UF-1
1.Pressthekey toviewtheinternalsumsofthescale.
2.Togotothenextparameter,pressthekey thescreenwillshowthevalueofthevoltageofthebattery.
3.Toexitthismodeandgobacktothenormalweighing,theusermustpressthekey or
8.2 CONFIGURATION OF THE LIMITS OF WEIGHT ( SUPERIOR AND INGERIOR) |
UF-2
1.Pressthekey to access the parameter.
2.Thedisplaywillshowthemessage“000.00L”(inferiorlimit)
3.Usethekeys and tomovethecursorandthekey to choose the desired number..
4.Pressthekey to confirm.