Baxtran BR16 - Converter Speed Configuration| Uf-7 (*); Blind Zero | Uf-8 (*); Configuration of Gravity | Uf-9 (*)

59
ENUSER’S MANUAL BR16
8.7 CONFIGURATION OF THE SPEED OF THE CONVERTER |UF-7
1.Pressthekey to access the parameter.
2.Pressthekey to choose the desired mode:
• Mode1:Normal
• Mode2:Fast
• Mode3:Slow
3. Pressthekey to confirm.
8.8 BLIND|
UF-8
Itappears0onscreenuntilthenextdivisionisselected.Itstartstoshowvaluesfromthatdivision.
Example:
Scalewithe=2g
Blind in 5 divisions
Itwillshow0untilitreaches25=10g,thefirstvalueitwillshowwillbe12g.
1.Pressthekey to access the parameter.
2.Pressthekey to select.
3.Pressthekey to confirm..
8.9 CONFIGURATION OF GRAVITY|UF-9
1.Pressthekey toviewthevalueoftheactualgravity.
2.Tochangethevalue,pressthekey ,nextyoumustusethekey and tomovethecursorandthekey to select the desired
number.
3.Pressthekey to confirm.