Bdcom GP3600-08 GPON - Introduction of BDCOM GP3600-08 GPON Access Device; Standard Configuration

BDCOM GP3600-08 GPON Hardware Installation Manual
- 1 -
Chapter 1 Introduction of BDCOM GP3600-08
GPON Access Device
The document describes the characteristics and parameters of BDCOM GP3600-08
GPON and gives an overview of GP3600-08 GPON.
1.1 Standard Configuration
BDCOM GP3600-08 GPON has 16 GPON SFP ports, 4 gigabit optical/electrical combo
ports, 4 gigabit SFP ports, 4 10GE optical ports, 1 Console port, and 1 ETH 100M
network management port. For details, see the following table.
Table 1- 1 Attributes of the necessary port
Port
Attribute
GPON port
GPON port, SFP port: having LINK/ACT
indicators
Gigabit optical/electrical port
Electric port: 1000M rate, MDI/MDIX
auto-identification, UTP(RJ45) port and the
LINK/ACT indicators
SFP port: having LINK/ACT indicators
MGMT
Management port: 100M rate
10GE Ethernet optical port
SFP+ port: having LINK/ACT indicators
Console port
An RJ45 port with a rate of 9600 bps
Besides, BDCOM GP3600-08 GPON has two power-supply sockets at its back.
Figure 1-1 Front faceplate of GP3600-08 GPON
Table 1- 2 Parts at the front template of GP3600-08 GPON
No.
Abbrev.
Name
Remarks