Power socket
Connect the female connector of the power cord here, and the male connector
to the AC (Alterna
g Current) power outlet. Please make sure the voltage of
the power supply meets the requirement of the input voltage
Grounding
The switch already comes with lightning protec
on mechanism. You can
also ground the switch through the PE (Protec
g Earth) cable of AC cord
or with Ground Cable.
Cau on： Please use the provided power cord.
Make sure the power socket has a good contact with the ground.
Installation
Package Contents
▄ PoE Switch. ........................................ 1
▄ Power Cord....... ................................. 1
▄ User Guide. ....................................... 1
▄ Accessories(Rack angle iron*2, Rack installa
on bolt*8, plas cushion*4)
Caution： If any part is lost and damaged, please contact your local agent immediately.
Safety Precautions
To avoid any device damage and bodily injury caused by improper use, please observe the following
rules.
▄ Keep the power off during the installa
on.
▄ Wear an ESD-preven
ve wrist strap, and make sure that the wrist strap has a good skin contact
and is well grounded.
▄ Use only the power cord provided with the switch.
▄ Make sure that the supply voltage matches the specifica
ons indicated on the rear panel of the
switch.
▄ Ensure the vent hole is well ven
ated and unblocked.
▄ Do not open or remove the cover of the switch.
▄ Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and
never use any other liquid cleaning method.
4
To Next Page
Loading...
Need help?
General
