Bdcom S3756F User Manual

BDCOM S3756F Hardware Installation Manual
- 2 -
If the indicator flickers, the system works
normally.
5
PWR
Power indicator
If the switch is powered on, the indicator is
on.
Additionally, BDCOM S3756F has 8 10G optical ports, 1 grounding column, 1 power socket at
its back.
Figure 1-2 The back template of the BDCOM S3756F switch
Table 1-3 Parts at the back template of the BDCOM S3756F switch
No.
Abbrev.
Name
Description
1
TE1-TE8
10G Ethernet optical ports
SFP+ interface, with LINK/ACT
indicators.
2
/
The grounding column
The grounding column must be fine.
3
/
AC power socket
AC90～264V
1.2 BDCOM S3756F Systematic Characteristic Parameters
Protocol
standard
Supported standard
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1s multiple spanning trees
IEEE 802.1p Class of Service
IEEE 802.1q tagged VLAN
IEEE 802.3x Flow control
IEEE 802.3z asymmetric flow control
IEEE 802.3ad Link aggregation
IP routing protocol standard
RFC 1058 RIP
RFC 1723 RIP v2
RFC 1583 OSPF v2

Bdcom S3756F Specifications

General

Brand	Bdcom
Model	S3756F
Category	Switch
Language	English