Safety warning structure
The following warnings are used in these
operating instructions:
DANGER
A warning of this category indicates an
impending dangerous situation.
If the dangerous situation is not avoided, it
may lead to serious injury or even death.
► Follow the instructions in this warning
to avoid possible danger of serious
injury or even death.
WARNING
A warning of this category indicates a
possible dangerous situation.
If the dangerous situation is not avoided, it
may lead to injuries.
► Follow the instructions in this warning
to avoid possible danger of serious
injury or even death.
ATTENTION
A warning statement for this safety risk
class indicates a damage risk.
If the situation is not avoided, it may lead
to material damage.
► Follow the instructions in this warning
to avoid material damage.
NOTE
► A note indicates additional information
that simplies the use of the machine.
Intended use
The machine is intended solely for drilling
operations in magnetic and non-magnetic
metals within the limits specied in the tech-
nical data.
Any use other than previously stated is con
-
sidered as improper use.
WARNING
Danger resulting from improper use!
If not used for its intended purpose and/or
used in any other way, the machine may
be or become a source of danger.
► Use the machine only for its intended
purpose.
► Observe the procedures described in
these operating instructions.
No claims of any kind will be accepted for
damage resulting from use of the appliance
for other than its intended purpose.
The risk must be borne solely by the user.
NOTE
► If used commercially, pay attention to
compliance with the accident preven
-
tion and occupational safety regula-
tions.
General instructions
To Next Page
Loading...
