Before using for the rst time
Transport inspection
As standard, the machine is supplied with
the components indicated in the Compo-
nents/delivery contents"section.
NOTE
► Check for visible signs of damage or
missing items on delivery. Report an
incomplete or damaged delivery to
your supplier/retailer immediately.
Preparation
This section contains important instructions
on the required preparation before beginning
any work.
Additional safety measures for
certain work
Additional safety precautions must be taken
for the following operations with the machine:
Non-horizontal work position
WARNING
Risk of injury from a falling machine.
When working in an inclined or vertical
position or during overhead work, the
machine must be secured using the safety
lashing strap (21) supplied to prevent it
from falling.
► Before using, check the safety lashing
strap for proper function. A damaged
safety lashing strap may not be used.
Replace a damaged safety lashing
strap immediately.
WARNING
► Attach the safety lashing strap in such
a way that the machine can fall away
from the operator if it slips.
► Lay the safety lashing strap as tightly
as possible around the handle of the
machine.
► Before beginning word, check that the
safety lashing strap and the lock is
rmly seated.
► Use the protective equipment stipulat
-
ed in the section Personal protective
equipment.
Work on scaffolding
WARNING
Risk of falling from sudden oscillating
movements of the machine.
When working on scaffolding, the machine
can make a sudden oscillating movement
on starting or in the event of interruption to
the power supply.
► Secure the machine with the safety
lashing strap (21) supplied.
► Wear a safety harness to protect your
-
self against falling.
Before using for the rst time
To Next Page
Loading...
