To Next Page
W
William ReedSep 13, 2025
What to do if BEA LZR-FLATSCAN SW Security Sensors encounters a memory problem?
- LLynn MarquezSep 13, 2025
If your BEA Security Sensors encounter a memory problem, send the sensor back for a technical check-up.
What to do if BEA LZR-FLATSCAN SW Security Sensors encounters a memory problem?
If your BEA Security Sensors encounter a memory problem, send the sensor back for a technical check-up.
General| Brand | BEA |
|---|---|
| Model | LZR-FLATSCAN SW |
| Category | Security Sensors |
| Language | English |
Explains the meaning of different LED indicator states for device status.
Guides users on configuring the sensor's behavior using DIP switches.
Details how to adjust the sensor's detection angle for optimal performance.
Procedure for teaching the sensor its operating environment and door movements.
Concludes the installation process with final checks and component fitting.
Sets the detection range for the door wing safety zone.
Sets the detection range for the pinch zone safety area.
Configures the minimum size of objects the sensor will detect.
Defines the duration for which the output remains active after detection.
Configures the sensor's output relays (R1, R2) for normally open/closed.
Adjusts settings to ignore unwanted objects or define a reference point.
Increases sensitivity to filter out external environmental disturbances.
Defines the depth of the detection zone, adjusted for specific conditions.
Provides access to teach-in, full reset, and partial reset functions.
Explains the process of unlocking, adjusting, and locking the sensor.
Describes how to set a unique access code for sensor configuration.
Details the procedure for removing a previously set access code.
Guides on modifying specific sensor parameters using the remote control.
Explains how to verify the current value of a specific parameter.
Procedures for resetting sensor settings to default factory configurations.
