What to do if there is no sound from my BEALE Keyboard?
If you're not getting any sound from your BEALE Keyboard, first ensure that the master volume is at an audible level. Then, verify that headphones are not plugged into the PHONES/OUTPUT jack. Also, check the R1/R2/L voice volume (Mixer) settings to confirm they are not set too low. Adjust the voice volumes to appropriate levels.
Why does my BEALE AK280 make noise when using a mobile phone?
If you hear noise when using a mobile phone near the BEALE Keyboard, it's likely due to interference. To resolve this, either turn off the mobile phone or increase the distance between the phone and the AK280 keyboard.
How to fix auto accompaniment when it doesn't play on my BEALE Keyboard?
If the auto accompaniment on your BEALE Keyboard doesn't play even with Sync Start enabled, you might be playing a key in the right-hand range. To start the accompaniment using Sync Start, ensure you play a key in the left-hand range of the keyboard.
What to do if certain notes sound like they have a wrong pitch on my BEALE AK280 Keyboard?
If certain notes on your BEALE Keyboard sound like they have the wrong pitch, ensure that the tuning value is set to 0. To set the instrument to default, press and hold the [+/ YES] and [–/NO] buttons simultaneously, then turn the power on.
Why doesn't the Harmony function work on my BEALE AK280 Keyboard?
The Harmony function on your BEALE Keyboard may not operate if a drum kit is selected for the voice R1. Please ensure that the Harmony function is on.
Why does my BEALE Keyboard make a popping sound when turned on or off?
The popping sound from the speakers of your BEALE Keyboard when turning the power on or off is normal and not a cause for alarm.
Covers FCC compliance and safety guidelines for digital devices.
Guides on using batteries or the AC power adapter for operation.
How to turn the keyboard on/off, adjust master volume, and play demo songs.
Combining voices and assigning different sounds to keyboard sections.
Playing with rhythm tracks and full accompaniment features.
Understanding chord structures, inversions, and basic theory.
Adjusting global pitch tuning and keyboard split point for performance.
Configuring beat patterns and assigning functions to pedals.
Setting reverb types and adjusting reverb level for sound enhancement.
Saving and loading custom keyboard configurations.
Steps to prepare and begin recording keyboard performances.
Using the lesson mode for practicing songs with feedback.
Using the dictionary to learn and test chord knowledge.
Common issues and their solutions for the keyboard.
Detailed technical data and features of the keyboard.
General| Brand | BEALE |
|---|---|
| Model | AK280 |
| Type | Mechanical Keyboard |
| Backlight | RGB |
| Interface | USB |
| Switch Type | Blue Switch |
| Keycaps | Double Shot ABS |
To Next Page