BEALE AK280 - System Controls and MIDI; Chorus Level, MIDI I;O, and Auto Power Off; Mixer Function for Track Volume Adjustment

AK280
14
1. Press and hold the [SHIFT] button and then repeatedly press
the [FUNCTION] button to select the Chorus Level menu. The
LCD will display “xxx Chr Lev”. The adjustable range is: 0–32. Use
the [+/YES]/[–/NO] button or the data dial to change the chorus
level.
2. Press the [+/YES] and [–/NO] buttons simultaneously to restore
its default setting: 0.
CHORUS LEVEL
Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select the MIDI IN/OUT menu. The LCD will
display “xxx Midi In”/“xxx Midi Out”.
1. Use [+/YES]/[–/NO] button or the data dial to change the MIDI
IN channel: 1–16, ALL. Press the [+/YES] and [–/NO] buttons
simultaneously to restore the MIDI IN channel to its default
setting: ALL.
2. Use the [+/YES]/[–/NO] button or the data dial to change the
MIDI OUT channel: 1–16. Press the [+/YES] and [–/NO] buttons
simultaneously to restore the MIDI OUT channel to its default
setting: 1.
Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select the Auto Power O menu. The LCD
will display “xxx Power O”. Use the [+/YES]/[–/NO] button or the
data dial to change the auto power o time. This function oers 3
options: 30 minutes, 60 minutes or OFF and the default setting is:
30 minutes.
MIDI IN/OUT
AUTO POWER OFF
MIXER
Mixer function separately adjusts the volume of dierent tracks.
1. Press the [MIXER] button to enter the Mixer Function menu. The LCD will display “030 Rhythm_s” initially when powered on; The next
time you enter the menu, it will show the same option you last selected.
2. Repeatedly press the [MIXER] button to select an option. Use [+/YES]/[–/NO] button or the data dial to change parameters.
The options and parameters are as follows:
Note:
It will exit the mixer menu if there is no operation in 5 seconds.
CONTENT LCD DISPLAY RANGE
Adjust the Rhythm track volume. XXX Rhythm_s 0–32
Adjust the Percussion track volume. XXX Rhythm_m 0–32
Adjust the Bass track volume. XXX Bass 0–32
Adjust the Chord 1 track volume. XXX Chord1 0–32
Adjust the Chord 2 track volume. XXX Chord2 0–32
Adjust the Chord 3 track volume. XXX Chord3 0–32
Adjust the Phrase 1 track volume. XXX Phrase1 0–32
Adjust the Phrase 2 track volume. XXX Phrase2 0–32
Adjust the Upper 1 track volume. XXX Upper 1 0–32
Adjust the Upper 2 track volume. XXX Upper 2 0–32
Adjust the Lower track volume. XXX Lower 0–32