Beamz DMX240 User Manual

9
1.5 SCENE COPY
1. Program enable. 5. Tap the MIDI/Rec button.
2. Tap the Bank Up/Down button
to select the bank that contains
the scene you wish to copy.
3. Select the scene you want to 6. Tap the Scene button you wish to
copy by tapping its Scene button. copy the scene to.
4. Tap the Bank Up/Down button
to select the bank you wish to copy
the scene to.
1.6 DELETE A SCENE
1. Tap the desired Scene button to select the scene
you wish to delete.
2. Press and hold down the Auto/Del button. While holding down the Auto/Del
button, tap the Scene button that stores the scene you wish to delete.
When a programmed scene is deleted, all DMX channel in this scene is set to 0.
1.7 DELETE ALL SCENES
This function will reset all DMX channel to 0 output.
1. With the power off, press and hold down the Program and Bank Down buttons
at a time.
2. Apply power again, all scenes should be cleared.

Beamz DMX240 Specifications

General

Brand	Beamz
Model	DMX240
Category	Controller
Language	English