EasyManua.ls Logo

Becker Centronic EasyControl EC411-III - Battery Replacement; Cleaning Instructions; Technical Specifications

Becker Centronic EasyControl EC411-III
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Changing batteries
You will find the appropriate battery type in the "Technical
data" chapter.
Cleaning
Only clean the device with a suitable cloth. Do not use aggressive cleaning
agents that may damage the surface.
Technical data
Rated voltage 3VDC
Battery type CR 2430
Degree of protection IP 20
Permissible ambient temperature -10 to +55°C
Maximum emitted transmission output ≤ 25 mW
Radio frequency 868.3 MHz
The maximum transmitter range on and in the building is up to 25m, and up to
350m in the open.
31-en