Becker PROFESSIONAL 50 - Page 72

72
>>> NAVIGATION MODE
> D
> GB
> F
> I
> PL
> Use the button to select whether
there is a trailer ( ) or not ( ).
> Select the total number of axles.
> Confirm your settings by selecting
.
Setting weight
> In the profile settings, press the button
for setting the weight.
> Press the button next to the weight to
be entered.
An entry menu will appear.
> Enter the desired weight.
> Confirm the entry in the entry menu by
pressing .
Once you have made all the required set-
tings, confirm your settings by selecting
.
Setting hazardous materials class
> In the profile settings, press the button
for setting the hazardous materials
class.
> Select the required hazardous materi-
als class.
Selecting vehicle category and name
Once you have changed one of the truck
profiles, you have the option to enter the
displayed truck symbol and name.
> Press the button to enter another
name.
The entry menu will appear.
> Enter the desired name.
> Confirm the entry in the entry menu by
pressing .
The name is changed.
> Press the button to change the
displayed symbol.
> Select the desired symbol. The new ve-
hicle category is displayed in the profile.
1
1
2
1
1
2