Frequency Selection Modes
24 VHF Transceiver 0638.420-071 Issue 06 02/2021
Start store function:
(in "Standard", Direct Tune" or "SCAN Mode").
o The symbol "STO” is shown.
• The functions "LAST" and Store/Restore are only available if
they are enabled in the configuration setup* -
("MEM OPTIONS").
* For details please refer to related manual:
http://www.becker-avionics.com/manuals/
Communication → VHF Transceiver
The transceiver has two databases:
• The user channel database - it has 99 channels CH01…CH99
to store frequencies with the possibility to apply a customized
label (identifier) with max. 10 alphanumeric characters.
• The last channel database - automatically stores last used
frequencies.
Named and callable as LAST 1…LAST 9, the customized
identifier will be shown (if applied).
• You can store frequencies (in the range
118.000...136.9916 MHz) to any channel with a push the
"STO" key.
• All 99 channels are changeable.
To Next Page
Loading...
