Frequency Selection Modes
0638.420-071 Issue 06 02/2021 VHF Transceiver 25
With the start of the storage procedure, the device proposes the next free channel
first.
• The label "FREE" shows together with the channel number if
the selected channel is vacant.
• A selected channel with a stored frequency has the label
"USED".
• If the same frequency is stored a second time, then the existing
data (frequency, label/identifier data) is offered to store.
• If the frequency has no label attached, ten underscore digits
are shown to give in a label.
• The cursor automatically starts on the first position.
Overview - The user can store data to:
• Next free channel (offered from system).
• A selected free channel.
• A selected used channel (the existing data will be overwritten).
STO
_ _ _ _ _ _ _ _ _ _
125.875
To Next Page
Loading...
